Delta Rostock mini G2s Extruder drives Axial motors

rickr · Post by **rickr** » Sat Sep 12, 2015 8:41 am

Hi Flamtap,

What a shame I already packed up my printer for return to Getech because setting it up totally as a single nozzle printer is something I had not considered trying before. Anyway, if my Ramps 1.4 board arrived before I would have simply swapped out the controller and replaced it with a standard Ramps 1.4 board bypassing all the inherent issues related to using an old version of firmware as the software base for this printer.

Additionally I suspect that there may be issues related to the operating system version and IU suspect that the Arduino IDE is not behaving properly under Windows 10, but I have no way of verifying other versions and configurations. Additionally I wish I knew how to handle arduino binary images so we could upload a binary image to the board to bypass the possibility of compiling/linking errors on the compilation platform.

I will hang around this forum to see how this equipment progresses even though I am moving to another Delta platform.

Cheers, Rick

bgco · Post by **bgco** » Wed Sep 16, 2015 6:33 am

Bump.

Same issue here. Single head printing works well; extruding with head 2 causes z axis to raise. Speed seems to be in relation to extrusion speed requested.

Mark · Post by **Mark** » Wed Sep 16, 2015 10:44 pm

This is a bug of the firmware, testing it now.

brent_jackson · Post by **brent_jackson** » Tue Sep 22, 2015 2:48 am

Re: Delta Rostock mini G2s Extruder drives Axial motors
Postby Mark » Tue Sep 08, 2015 8:34 pm

We are testing the latest firmware now, it won't take long to fix the problem, plz wait with patience, tks!

It has been 2 weeks now... any update to fix this problem?

Mark · Post by **Mark** » Tue Sep 22, 2015 3:34 pm

The firmware looks good for now, I'll send the firmware and the settings to you if you want to have a try.

rickr · Post by **rickr** » Tue Sep 22, 2015 4:12 pm

Mark wrote:The firmware looks good for now, I'll send the firmware and the settings to you if you want to have a try.

Yes, please post what you have and what we need to do here. That would be very helpful. Thanks, Rick

flamtap · Post by **flamtap** » Tue Sep 22, 2015 8:49 pm

Yes, please post it here.

Also, is this a custom part of the Marlin firmware or something? Why is the problem caused/fixed by Geeetech changes?

flamtap

JHill42 · Post by **JHill42** » Thu Sep 24, 2015 8:25 am

Hello Mark,

If you would, please send it to me as well - I'd love to give it a try.

Thanks,

Jeff

bgco · Post by **bgco** » Mon Sep 28, 2015 1:44 am

How is this firmware update working for everyone?

Could we post it to this forum, or could someone PM me a copy?

Thanks!

Mark · Post by **Mark** » Sun Oct 11, 2015 5:11 pm

Hi guys, download the firmware here:
http://www.geeetech.com/forum/viewtopic ... 10&t=17046