STL files for delta rostock mini G2&G2S and I3 printer

[Sherry]

hello,every one.here is the STL files for delta rostock mini G2&G2s and I3 printer, check the attachment.you can download it to print some parts if needed.

STL files for delta rostock mini G2_G2S.zip

(425.57 KiB) Downloaded 2510 times

I3 STL8.rar

(1.57 MiB) Downloaded 2950 times

[micheal]

Thank you for these. Great work.

[brent_jackson]

Thanks so much!

What I could really use is the templates for top and bottom frame plates. I would like to modify to cut acrylic for a larger frame that would also accomodate a 12" non-heated plate.

[Roxy]

hello,every one.here is the STL files for delta rostock mini G2&G2s in the attachment.you can download it to print some parts if needed.

Sorry, but this isn't true. The Platform piece in the archive is only for the G2. I need the G2s platform. It has a flat spot for the micro-switch to be mounted and it has a guide for the Allen Key to slide into.

Is there any chance you can publish the G2s Platform piece ?

[Mark]

They are the same for G2 and G2S:

[gordonendersby]

Hi,
Just putting together the dual head Rostock Mini G2S.
Ive been a bit heavy handed with the LCD controller mount pieces and broken one around the nut trap.
Part no. #A9

Are the STL's or laser cutting files available so I can print a replacement on my other 3d printer.

Thanks

Gordon

[bang]

Hi,Gordan
Here it is:
http://www.thingiverse.com/thing:1919959

[gordonendersby]

Thank you.
And ive now got some more search terms to use.
I didnt know which other model geeetech printers share some same parts.

Gordon

[bang]

Thank you.
And ive now got some more search terms to use.
I didnt know which other model geeetech printers share some same parts.

Gordon

What exactly do you mean?

[gordonendersby]

I know the printer I've got as a geeetech rostock mini g2 or g2s.

On that thingiverse part it's listed for rostock 301.
When I searched thing I verse I didn't find it with just what I knew it as.

This model 301 is either a slightly different printer or maybe an earlier version of what I've got and shares the same LCD support part.

So nest time I'll add 301 as part of my search .