Rostock mini G2s Auto Leveling Probe

Post Reply
smithti8
Posts: 12
Joined: Sat Jun 13, 2015 3:16 am

Rostock mini G2s Auto Leveling Probe

Post by smithti8 » Thu Jul 16, 2015 2:24 am

I am nearly complete with my assembly, but I noticed a potential problem. It appear that the Auto Leveling Probe does not extend down below the hotend. It looks like the hotend nozzle will hit the bed before the probe. Did I assemble something wrong or is the probe too short? See the attached pictures.

Thanks
Attachments
Probe1m.JPG
hotend below probe
Probe1m.JPG (91.84 KiB) Viewed 14043 times
Probe3m.JPG
probe all the way down
Probe3m.JPG (180.07 KiB) Viewed 14043 times
Probe2m.JPG
probe side view
Probe2m.JPG (94.52 KiB) Viewed 14043 times

Sherry
Posts: 362
Joined: Wed Jul 01, 2015 12:52 pm

Re: Rostock mini G2s Auto Leveling Probe

Post by Sherry » Thu Jul 16, 2015 8:45 am

hi,guys,you forgot to put down the probe when auto leveling,when finish auto leveling ,please remember to hook up it.Referring to the link:http://www.geeetech.com/wiki/index.php/ ... o-leveling

smithti8
Posts: 12
Joined: Sat Jun 13, 2015 3:16 am

Re: Rostock mini G2s Auto Leveling Probe

Post by smithti8 » Thu Jul 16, 2015 8:39 pm

As shown in the picture the probe is down. and it still does not extend down below the nozzle. Did I assemble something wrong or is the probe too short?

Sherry
Posts: 362
Joined: Wed Jul 01, 2015 12:52 pm

Re: Rostock mini G2s Auto Leveling Probe

Post by Sherry » Fri Jul 17, 2015 5:32 pm

smithti8 wrote:As shown in the picture the probe is down. and it still does not extend down below the nozzle. Did I assemble something wrong or is the probe too short?
maybe you have inversed the the the half bracket,look at the picture,this is the right assembly.
Attachments
QQ图片20150717173011.png
QQ图片20150717173011.png (156.08 KiB) Viewed 14014 times

Jnida63
Posts: 1
Joined: Thu Jul 30, 2015 8:49 pm

Re: Rostock mini G2s Auto Leveling Probe

Post by Jnida63 » Sat Aug 01, 2015 4:29 am

Not to hijack this thread, but my mini G2S came without the probe or the limit switch even though it states it has autoleveling when i purchased it and it shows on my parts list, can anyone give me the dimensions of the rod so that i can make one?

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: Rostock mini G2s Auto Leveling Probe

Post by Mark » Mon Aug 10, 2015 5:42 pm

Just contact the customer service to get a new one .

ianbn
Posts: 8
Joined: Sun Sep 06, 2015 4:18 am

Re: Rostock mini G2s Auto Leveling Probe

Post by ianbn » Thu Sep 24, 2015 5:59 pm

Hi,

I have the same problem, was it was it the case of an "inversed half bracket"? Or was it something else before i go ahead and disassemble :)

Thanks

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: Rostock mini G2s Auto Leveling Probe

Post by Mark » Thu Sep 24, 2015 8:09 pm

yes, once I ran into this problem too.

ianbn
Posts: 8
Joined: Sun Sep 06, 2015 4:18 am

Re: Rostock mini G2s Auto Leveling Probe

Post by ianbn » Thu Sep 24, 2015 9:43 pm

Did you solve it by tuning around the half bracket?

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: Rostock mini G2s Auto Leveling Probe

Post by Mark » Thu Sep 24, 2015 10:36 pm

It shoul be assembled as the picture shows, I reassembled it before.

Post Reply