err: mintemp

Post Reply
rrobertm
Posts: 3
Joined: Mon Jun 29, 2015 1:39 pm

err: mintemp

Post by rrobertm » Tue Jun 30, 2015 2:06 pm

I have a big problem with my printer. It shows next message: "Err: MINTEMP". What should I do, because I cannot set the bed or nozzle temperature manually? It doesn't store tempertature settings. The printer model is I3 pro B.
It doesn't print any job too! Nothing is heating up!
Last edited by rrobertm on Tue Jun 30, 2015 3:28 pm, edited 1 time in total.
Top
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: err: mintemp

Post by zhangxueyou » Tue Jun 30, 2015 3:02 pm

Hi, when LCD is displaying "ERROR MIN TEMP", you can heat up the extruder, please check if you have connected extruder thermistor to correct slot. Please take a photo, let me check for you.
Top
rrobertm
Posts: 3
Joined: Mon Jun 29, 2015 1:39 pm

Re: err: mintemp

Post by rrobertm » Tue Jun 30, 2015 3:27 pm

rrobertm wrote:I have a big problem with my printer. It shows next message: "Err: MINTEMP". What should I do, because I cannot set the bed or nozzle temperature manually? It doesn't store tempertature settings. The printer model is I3 pro B.
It doesn't print any job too!
Nothing is heating up!
Top
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: err: mintemp

Post by zhangxueyou » Tue Jun 30, 2015 4:06 pm

rrobertm wrote:
rrobertm wrote:I have a big problem with my printer. It shows next message: "Err: MINTEMP". What should I do, because I cannot set the bed or nozzle temperature manually? It doesn't store tempertature settings. The printer model is I3 pro B.
It doesn't print any job too!
Nothing is heating up!
Sorry, I left a word out.
When LCD is displaying "ERROR MIN TEMP", you can not heat up the extruder.
Please show me your wiring.
Top
rrobertm
Posts: 3
Joined: Mon Jun 29, 2015 1:39 pm

Re: err: mintemp

Post by rrobertm » Wed Jul 01, 2015 7:01 pm

Fixed err:mintemp, but now I got another problem: the extruder motor is not working. I moved it on x axis motor connector and it works. After that I switced the small motor modules on the mainboard and the one mounted for the extruder motor is not working.
Top
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: err: mintemp

Post by zhangxueyou » Thu Jul 02, 2015 1:52 pm

rrobertm wrote:Fixed err:mintemp, but now I got another problem: the extruder motor is not working. I moved it on x axis motor connector and it works. After that I switced the small motor modules on the mainboard and the one mounted for the extruder motor is not working.
Is the extruder moving with no filament?
Top
Blisk
Posts: 28
Joined: Wed Dec 23, 2015 3:05 am

Re: err: mintemp

Post by Blisk » Fri May 20, 2016 9:27 pm

When you fix somethng you should write how you did it, that's why forum is!
Top
Post Reply

Return to “Firmware”