How to upload the firmware to Sanguinololu

[johnz]

Can some one please put a step by step guide on how to upload the firmware on Sanguinololu board??? I'm totally lost on how to do it?? I have read and read and still cant get it??

[zhangxueyou]

It will take some time, please wait for about 30 minutes, maybe 20 minutes.

[johnz]

Never mind got it working using this great post!! http://www.geeetech.com/forum/viewtopic ... 20&t=16318

[zhangxueyou]

If you want to download the firmware for geetech printer, find the one for your printer here:
viewtopic.php?f=10&t=17046
for GT2560 please come to here to install the firmware:
viewtopic.php?f=13&t=17181

1. Download arduino 1.0.1,
download link: http://www.geeetech.com/wiki/index.php ... Resources

232323.jpg (80.04 KiB) Viewed 94044 times

download arduino.png (15.79 KiB) Viewed 96820 times

Unzip the file.

unzip arduino.png (18.85 KiB) Viewed 96820 times

For sanguinololu, you need to copy the folder named "sanguino" to the folder "hardware" of Arduino IDE.
The "sanguino" folder:

sanguino.zip

(209.25 KiB) Downloaded 2875 times

Download this file and unzip it and move it to the folder "hardware".

1 for sanguinololy.jpg (34.93 KiB) Viewed 76249 times

2. Connect your printer to computer, open "arduino.exe".(There is no content in arduino when you open it, if not, delete the content)

open arduino.png (27.83 KiB) Viewed 96820 times

3. Here take firmware "I3_Sanguinololu" for example.
for GT2560, you can also come to here to install the firmware:
viewtopic.php?f=13&t=17181

Open folder "I3_Sanguinololu"(files of Marlin firmware), double click the "XXX.ino" file to open the firmware in the arduino.
If you can't find the .ino file, then select all the files (59 in all) and drag them into arduino.

open sanguino.png (34.28 KiB) Viewed 96820 times

select files.png (135.59 KiB) Viewed 96820 times

drag files into arduino.png (49.14 KiB) Viewed 96820 times

4. Choose correct board type.(Tools>Board>Sanguino W/ATmega1284p 16mhz) (If you use GT2560, choose "Arduino Mega2560 or MegaADK")

choose board type.png (325.37 KiB) Viewed 96820 times

5. Choose correct serial port.(Tools>Serial Port>...(Usually only one choice for Windows)).

choose port.png (137.49 KiB) Viewed 96820 times

6. Click the icon "→" to upload the firmware to your mainboard.

upload.png (26.62 KiB) Viewed 96820 times

waiting for compling and uploading.

compiling.png (33.94 KiB) Viewed 96820 times

uploading.png (35.65 KiB) Viewed 96820 times

7. When displaying "Done uploading", you have successfully uploaded the firmware to your mainboard.

done uploading.png (34.96 KiB) Viewed 96820 times

1 for sanguinololy.jpg (34.93 KiB) Viewed 76249 times

[johnz]

Thank you much easier !...

[acep001]

Hi, according to step 6, could you please send me the "I3_Sanguinololu"(files of Marlin firmware), my printer is black acrylic i3. Thanks.

[Sen]

Please send me the Firmware for Geeetech i3 pro C dual extruder with geeetech GT2560 controller please? (White board)

email: senseier2@yahoo.com

[ric chin]

The firmware upload is not working for me ...I am completely lost ....Please.... Would it be possible to get concise directions for the mac other than.... its just like windows...because it is not.

[zhangxueyou]

The firmware upload is not working for me ...I am completely lost ....Please.... Would it be possible to get concise directions for the mac other than.... its just like windows...because it is not.

Is this thread useful?
http://www.geeetech.com/forum/viewtopic ... 21&t=16320
And arduino1.6.0 is for windows, the latest version for mac is 0.56: http://www.repetier.com/w/?wpdmdl=1777

[ric chin]

I have given up on the mac...your instructions where useless, because the unit doesn't work...period. i went out in desperation thinking i'm some kind of idiot..and bought a new windows computer...down loaded all relevant files for windows did the firmware up load got confirmation it was up loaded.... and guess what....it still doesn't work...so whats your plan now? I would like to get this unit working thank you, what would be the best solution ...send the dam board or whole printer back to you...or some other strategy might be more appropriate...i am open to suggestions...