How to start Geeetech I3 Pro C in Repetier-Host

[zhangxueyou]

Open Repetier-Host (Download link: http://www.repetier.com/download-now/), Access "Printer settings":

QQ截图20150526094205.png (133.12 KiB) Viewed 39536 times

Set amount of extruder as 2, and set correct nozzle diameter:

QQ截图20150526094443.png (29.43 KiB) Viewed 39536 times

Then you can control both extruders on Repetier-Host (Note:The extruder can not move unless the temperature is more than 180 degrees):

QQ截图20150526145044.png (75.72 KiB) Viewed 39536 times

Slicer setting:
To have a good 3D item,you need to have a good slicer setting, and distribute jobs for 2 extruders:
Click "configuration" to access slicer setting:

QQ截图20150526094538.png (86.4 KiB) Viewed 39536 times

For more details of sclicer setting, you can download the attachment to refer:

slicer settings for I3C.zip

(740.38 KiB) Downloaded 2198 times

[ric chin]

the software show is not even close to the current version available for the mac...can you up date your instructions for the current version.

[TheFlyingDutchman]

I'm also having trouble getting it up and running using a Mac. Instructions are unclear, and the programs look different on Mac.

[poeytan]

Hello, I am in possession of a geeetech 3i. Small problem during the execution of gcode with slice3r, fusion son are not contiguous. We can help by m m addressing the right configuration of the printer with a 1.75 thread.
Thank you very much

[gpau]

For two-color printing it is possible that I have to change here?

// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
// For the other hotends it is their distance from the extruder 0 hotend.
#define EXTRUDER_OFFSET_X {0.0, 0.00} // (in mm) for each extruder, offset of the hotend on the X axis
#define EXTRUDER_OFFSET_Y {0.0, 0.00} // (in mm) for each extruder, offset of the hotend on the Y axis

[tokeandsmokeshop]

Keep up the great work thank you for posting

https://tokeandsmokeshop.com