Mirrored print

ohruska · Post by **ohruska** » Wed Apr 15, 2015 4:40 pm

Please advice.
My printer prints parts mirrored against the model.
Ota

zhangxueyou · Post by **zhangxueyou** » Wed Apr 15, 2015 5:05 pm

Hi, what type is your pinter?
I think the quickest way is swapping the connetion of motors of x and y, and swapping the connection of x and y endstops.

ohruska · Post by **ohruska** » Wed Apr 15, 2015 7:42 pm

I have PRUSA I3 from GREETECH
When I turned the commissioning of the Y-axis direction of the motor to drive in properly reference.

ohruska · Post by **ohruska** » Wed Apr 15, 2015 8:08 pm

I have PRUSA I3 from Green
When I turned the commissioning of the Y-axis direction of the motor to drive in properly reference

zhangxueyou · Post by **zhangxueyou** » Thu Apr 16, 2015 10:40 am

These are the positive direction of x , and z axes.

: QQ截图20150416103734.png (678.36 KiB) Viewed 7409 times

ohruska · Post by **ohruska** » Fri Apr 17, 2015 2:16 am

Thank you for your help.
Everything is already OK.
I had exchanged X and Y axis
Once again, thank Ota

Geeetech

Mirrored print

Mirrored print

Re: Mirrored print

Re: Mirrored print

Re: Mirrored print

Re: Mirrored print

Re: Mirrored print