Defective A4988 Module, Control Board, and LCD
-
- Posts: 1405
- Joined: Fri Feb 06, 2015 1:33 pm
Re: Defective A4988 Module, Control Board, and LCD
Please leave your email address.
-
- Posts: 15
- Joined: Mon Mar 30, 2015 5:08 pm
-
- Posts: 15
- Joined: Mon Mar 30, 2015 5:08 pm
Re: Defective A4988 Module, Control Board, and LCD
I have left my email as requested.
I found your firmware but it will not upload to your Sanguinololu V1.3a board using Arduino 1.0.6.
I have set the proper board type and comm port.
It just gives the error:
avrdude: stk500_getsync(): nit in sync: resp=0x00
I found your firmware but it will not upload to your Sanguinololu V1.3a board using Arduino 1.0.6.
I have set the proper board type and comm port.
It just gives the error:
avrdude: stk500_getsync(): nit in sync: resp=0x00
-
- Posts: 1405
- Joined: Fri Feb 06, 2015 1:33 pm
Re: Defective A4988 Module, Control Board, and LCD
Please check your email.
-
- Posts: 15
- Joined: Mon Mar 30, 2015 5:08 pm
Re: Defective A4988 Module, Control Board, and LCD
I found your firmware but it will not upload to your Sanguinololu V1.3a board using Arduino 1.0.6.
I have set the proper board type and comm port.
It just gives the error:
avrdude: stk500_getsync(): nit in sync: resp=0x00
I have set the proper board type and comm port.
It just gives the error:
avrdude: stk500_getsync(): nit in sync: resp=0x00
-
- Posts: 15
- Joined: Mon Mar 30, 2015 5:08 pm
Re: Defective A4988 Module, Control Board, and LCD
I found your firmware but it will not upload to your Sanguinololu V1.3a board using Arduino 1.0.6.
I have set the proper board type and comm port.
It just gives the error:
avrdude: stk500_getsync(): nit in sync: resp=0x00
I have set the proper board type and comm port.
It just gives the error:
avrdude: stk500_getsync(): nit in sync: resp=0x00
-
- Posts: 1405
- Joined: Fri Feb 06, 2015 1:33 pm
Re: Defective A4988 Module, Control Board, and LCD
You can try to upload with Arduino 1.0.1:
http://arduino.googlecode.com/files/ard ... indows.zip
http://arduino.googlecode.com/files/ard ... indows.zip
-
- Posts: 15
- Joined: Mon Mar 30, 2015 5:08 pm
Re: Defective A4988 Module, Control Board, and LCD
Same error using Arduino 1.0.1
-
- Posts: 1405
- Joined: Fri Feb 06, 2015 1:33 pm
Re: Defective A4988 Module, Control Board, and LCD
Did you drag all the files of firmware into Arduino?
-
- Posts: 15
- Joined: Mon Mar 30, 2015 5:08 pm