ME CREATER NO POWER

[bandit]

HELLO! WENT TO POWER UP THE PRINTER, THE POWER SWITCH LIGHTS AND IF I PLUG IN USB DISPLAY COMES ON WITH NO INFORMATION, AND ON MAIN BOARD RED LED LITE IS ON. LED 1 ON POWER SUPPLY IS DOES NOT LITE UP. THE FUSE IS GOOD, CHECKED WITH OHM METER. I AM GETTING DISGUSTED WITH THIS PRINTER, ISSUE AFTER ISSUE. DUE YOU HAVE ANY THAT CAN WORK ON THIS PRINTER LOCALLY IN THE FORT LAUDERDALE AREA, USA. I NEED HELPPPPPPPP. I HAVE NOT BEEN ABLE TO MAKE ONE PRINT. EXTRUDER DOES NOT HEAT UP. DID I GET A LEMON. PLEASE HELP.

HOPE TO HEAR FROM YOU ASAP( AS SOON AS POSSIBLE. MY BUSINESS IS DEPENDENT ON THIS MACHINE.
THANKS

[zhangxueyou]

1. Please turn on the printer, check if you computer detects the printer.
2. Please check if input voltage equals the AC voltage of your country.

[bandit]

HELLO, THE SWITCH IS ON 110V, THERE IS NO POWER IN THE PRINTER SO HOW WOULD THE COMPUTER RECOGNIZE THE PRINTER. BARE IN MIND THAT I HAVE A ELECTRONIC BACK GROUND, I AM A RETIRED ELECTRONIC TEACHER OF TRADE SCHOOL..
THE RIGHT THING TO DO WOULD BE TO SEND REPLACEMENT POWER SUPPLY. THERE IS A SLIGHT CHANCE THAT THE SANGUINOLOLU BOARD MY HAVE BEEN DAMAGE ALSO. PLEASE DO NOT MAKE ME WAITE FOR THESE ITEMS.
THNKS
STEVE

[zhangxueyou]

When you connect the printer and computer via USB cable, Check if there is a new COM port at "computer>manage>device manager".

[bandit]

THERE IS NONE. THANK YOU

[bandit]

I JUST TOLD YOU THERE IS NONE. THERE IS NO POWER IN THE PRINTER

[zhangxueyou]

Please do not feedback similar problems in different threads. I can't provide you with better service.