Problema eje Z en primeras capas

Post Reply
07fnr42@gmail.com
Posts: 1
Joined: Fri Mar 01, 2019 8:52 pm

Problema eje Z en primeras capas

Post by 07fnr42@gmail.com » Fri Mar 01, 2019 9:09 pm

Buenos dias, soy principiante en el mundo de las impresoras 3d, compré el kit y una vez montada y calibrada, tanto los ejes como la cama caliente, imprimí el cubo de calibración, pero las primeras capas
las hace una sobre otra, sobre el cristal, por lo tanto el cubo que debería quedarme 1x1x1 y me queda 1x0.7x1 y no se que puede ser

Muchas gracias de antemano :D
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Problema eje Z en primeras capas

Post by William » Tue Mar 05, 2019 5:02 pm

You need to calibrate the Z setp at first.
Try to check your z axis rod type then set the correct step values for it:
1.T8:400
2.M8:2560
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Ubedt
Posts: 11
Joined: Fri May 27, 2022 4:18 pm

Re: Problema eje Z en primeras capas

Post by Ubedt » Fri May 27, 2022 4:26 pm

Thank you for the information
Top
nguyentra3493
Posts: 4
Joined: Wed Jun 08, 2022 11:06 pm

Re: Problema eje Z en primeras capas

Post by nguyentra3493 » Wed Jun 08, 2022 11:09 pm

Thien Ha Bet (thabet) is considered as the house that owns the largest and most diverse online game store. There are all forms of sports betting, attractive card games, etc. with high winning rates. Including prizes up to 5 billion VND. Please visit Thiên Hạ Bet to join
Top
Post Reply

Return to “Resoures Sharing”