• Garjiya Mandir Ramnagar Uttarakhand is an ancient temple and one of the Shaktipeeth in India, located in the middle of the Kosi River and dedicated to the goddess Girjia (which literally means the daughter of the mountain, the name of Parvati, the wife of Lord Shiva).
• It is situated in Garjiya village of Ramnagar at Nainital district of Uttarakhand.
• It is very famous temple of Uttarakhand and one of the oldest Devi temples in India.
• Garjiya mandir is near Corbett National Park on the way to the Dhikhala zone and museum.
• Inside the temple, “Maa Garjiya sits in the center of the temple, adorned with red gold chunri, floral ornaments and garlands, and bless all the bhakts who come to meet her“.
• The temple always remain open for its devotee throughout the year.
• To get to the top of the temple, you have to climb a steep staircase and there you can see the 4.5 feet tall Garjiya Devi idol. There is an idol of Garjiya Devi, 4.5 feet high, as well as idols of Devi Saraswati, Lord Ganesha and Batuka Bhairava.
• In Garjiya Mata Mandir Ramnagar, there is also the statue of Laxminarayan which is many years old.
Garjiya Mandir Ramnagar, Uttarakhand
-
- Posts: 7
- Joined: Mon Feb 28, 2022 12:43 am
Jump to
- Update Announcement/Product Release
- Firmware
- 3D Printer
- ↳ Thunder
- ↳ Mizar Pro
- ↳ Mizar S
- ↳ Mizar
- ↳ Geeetech I3/DIY Printer Series
- ↳ FAQ-Geeetech I3/DIY Printer series
- ↳ Geeetech I3 Pro B
- ↳ Geeetech I3 Pro W
- ↳ Geeetech I3 Pro X
- ↳ Geeetech I3 Aluminum
- ↳ Geeetech I3 Aluminum Pro
- ↳ Geeetech I3 Duplicator 5
- ↳ Geeetech I3 Pro C
- ↳ Geeetech I3 M201
- ↳ Geeetech A10 Series
- ↳ A10T
- ↳ Geeetech A20 Series
- ↳ Geeetech A20
- ↳ Geeetech A20M
- ↳ A20T
- ↳ Geeetech A30 Series
- ↳ A30M
- ↳ A30 PRO
- ↳ Geeetech E180 Mini
- ↳ Geeetech MeCreator2
- ↳ GiantArm D200
- ↳ Geeetech Delta Series
- ↳ Geeetech DP200 Series
- 3D Printing Software
- ↳ Configuration Profiles Sharing
- ↳ Software
- ↳ Wifi Box
- ↳ Bug report
- ↳ Download
- Hardware
- ↳ 3D Printer Hardware
- ↳ Stepper Motor
- ↳ Control Board
- ↳ Extruder
- ↳ Hot bed
- ↳ LCD Panel
- ↳ Power Supply Unit
- ↳ Assembly
- ↳ Others
- ↳ Video about cleaning and replacing nozzles
- Print Quality
- Resoures Sharing
- Feedback&Suggestion
- Project Talent Show
- Other Discussion
- ↳ Leveling Guide
- ↳ Open Hardware
- ↳ Mods And Hacks
- ↳ Products FAQ
- ↳ Tips & Tricks
- ↳ Discuss & Help
- ↳ Windows
- ↳ MAC