A10M with clean Marlin 2.0 [ BLtouch ]

Post Reply
Dombo71
Posts: 4
Joined: Mon Dec 21, 2020 6:45 pm

A10M with clean Marlin 2.0 [ BLtouch ]

Post by Dombo71 » Thu Dec 31, 2020 7:20 am

Hi...
Just get my printer..and did a clean Marlin install.
Looking great, and working fine.
Sound of the fans i loud, and are there simple solotions? [ firmware settings? ]

Only the strange part, the marlin see the board as v3 and i do have a 4.0

So i did try the update the firmware form geeetech, only stil got errors.
Where do i go wrong?

Other thing when i mount the BLtouch, the extruder is 5cm above the bed? [ someone have great how to? ]
Is this correct en do i need to setup the BLtouch, or is this a other problem?

Some one that have a clean Marlin install?
Or do i need to run the geeetech firmware?

dkerr
Posts: 3
Joined: Tue Dec 29, 2020 11:51 pm

Re: A10M with clean Marlin 2.0 [ BLtouch ]

Post by dkerr » Sat Jan 02, 2021 2:47 am

I used this video to tune in my BLTouch https://www.youtube.com/watch?v=y_1Kg45APko
Seems to have worked ok. I used Octoprint to send Gcodes to the printer, if you don't have an option to do that then you'll have to figure out Pronterface or some of the other options (which are all terrible IMO)

I don't think the fans can be fixed in the firmware, i did see some posts on shrouds and mods that may help. (sorry, i didn't keep the links)
Fans are pretty cheap, there are quieter ones you could probably replace the stock ones with.

With a 4.0 board you should be able to use vert's marlin https://github.com/Vertabreak/Verts-Marlin. Grab the release tag.

IsadoraSigmund
Posts: 1
Joined: Mon Feb 01, 2021 4:44 pm

Re: A10M with clean Marlin 2.0 [ BLtouch ]

Post by IsadoraSigmund » Mon Feb 01, 2021 4:50 pm

The sound of the machine is annoying and very hard to hear.

EricaWright
Posts: 1
Joined: Mon Dec 20, 2021 10:35 am

Re: A10M with clean Marlin 2.0 [ BLtouch ]

Post by EricaWright » Mon Dec 20, 2021 10:40 am

I find it too bad to sound when listening to some samsung klingelton. I found it lifeless with some minor interference.

Rick Washington
Posts: 1
Joined: Thu Jan 13, 2022 11:18 am

Re: A10M with clean Marlin 2.0 [ BLtouch ]

Post by Rick Washington » Thu Jan 13, 2022 11:22 am

Sound effects don't sound right, telecharger with some short sound and I found it to work fine.

sonneriesvip
Posts: 2
Joined: Mon Jan 17, 2022 3:02 pm

Re: A10M with clean Marlin 2.0 [ BLtouch ]

Post by sonneriesvip » Mon Jan 17, 2022 3:03 pm


GarrettFitzgerald
Posts: 1
Joined: Fri Feb 11, 2022 12:26 pm

Re: A10M with clean Marlin 2.0 [ BLtouch ]

Post by GarrettFitzgerald » Fri Feb 11, 2022 12:31 pm

A very difficult question to answer , I also searched for that answer . Thanks Vert for helping me I succeeded in fixing the error.



____________________________________________________________
Click font gerenator free.

lawn123
Posts: 1
Joined: Thu Mar 03, 2022 10:41 am

Re: A10M with clean Marlin 2.0 [ BLtouch ]

Post by lawn123 » Thu Mar 03, 2022 10:43 am

You have a lot of good articles to share. It will be extremely beneficial to myself, my family, and my friends. Thank you for sharing it with us. free games online

sonneriesvip
Posts: 2
Joined: Mon Jan 17, 2022 3:02 pm

Re: A10M with clean Marlin 2.0 [ BLtouch ]

Post by sonneriesvip » Mon Mar 21, 2022 4:25 pm

Collection de la meilleure liste de sonneries françaises.https://sonneriesvip.com/sonnerie-totally-spies-mp3/

cindery
Posts: 1
Joined: Fri Aug 19, 2022 3:33 pm

Re: A10M with clean Marlin 2.0 [ BLtouch ]

Post by cindery » Fri Aug 19, 2022 3:37 pm

Since you put so much time and effort into your writing, I want more individuals would do the same. Your vision and discernment have made a deep effect on me. smash karts

Post Reply