Cant get constant print Results

[Meister_Knobi]

Hello,

im totaly new to 3d printing and i have a lot of trouble to make it work. The Assably took some time but that was the easy part. First of all i spend 2 Days just to finding out that the FW on my sanguinololu didnt match the i3 at all, buildroom of 150x140x130mm or so, didnt matter anymore but i wasted a lot of time with that.

To the time i found the right FW and howi flash it on the Chip are 4 Days gone...
ATM i have 2 Diffrent Configs, my own based on this download/file.php?id=1650 and the unchanged download/file.php?id=2852

With my own Config i had better Results but very inconsistant.

photo_2018-10-08_22-33-34.jpg (136.66 KiB) Viewed 12177 times

From left to right: 1st Print with My Own Version V1, 2nd Print with my own Version V2 (minior changes), 3rd Print: Again V2 and the 4th Print Vanilla Geeetech FW
when anyone know what im doing wrong, please let me know.

[Zimraan]

I was sad to read about your problems with 3d printers, and I think that if you visit bestdissertation.com reviews you might be able to find some articles which will be able to help you.

[Fassel]

I loved it how my task are completed with the help of click here. It can make it done within minuites. I would rate it all five stars!