A10 y axis motor destroyed twice

chciumrit
Posts: 1
Joined: Wed Nov 13, 2019 3:47 am

A10 y axis motor destroyed twice

Post by chciumrit » Wed Nov 13, 2019 3:52 am

So i printed then i done printing and start new print and stepper motor of y axis started to creak so i tried to turn it off and on it still doesnt help so i replaced motor for new one and i have the same result.

Jarda3d
Posts: 189
Joined: Sat Jan 26, 2019 8:42 am

Re: A10 y axis motor destroyed twice

Post by Jarda3d » Wed Nov 13, 2019 6:45 am

Motor is not destroyed. But wheels need to lubricate. Use oil for gun conservation, motor oil or or for sewing machines. Use only mineral oils, nothing "eco-terrorists".
A10M Slic3r profile: here and fresh on github (lot of tips here)
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A10 y axis motor destroyed twice

Post by William » Wed Nov 13, 2019 9:31 am

:D Hi, you can check the tightness of your belt for proper adjustment;
Check whether the bearing and the pulley are issued, and issue the lubricating oil for lubrication;
Driver board voltage reference range: 0.8-1.2V
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Elainoes
Posts: 1
Joined: Sat Nov 21, 2020 5:08 pm

Re: A10 y axis motor destroyed twice

Post by Elainoes » Sat Nov 21, 2020 5:09 pm

Motor destroyed twice, Show me your interest where i can easily take those https://www.topbritishwriters.com/ options which we can collect after showing some interest. This is really valid way when we are performing that time we need to collect all the material.

seoseoseo11212
Posts: 7
Joined: Sat Jun 11, 2022 3:58 pm

Re: A10 y axis motor destroyed twice

Post by seoseoseo11212 » Sat Jun 11, 2022 4:01 pm

Motorola Moto G41 Specs, Reviews and Price in Pakistan, MLT World offers all information about this phone.

seoseoseo11212
Posts: 7
Joined: Sat Jun 11, 2022 3:58 pm

Re: A10 y axis motor destroyed twice

Post by seoseoseo11212 » Wed Aug 03, 2022 1:13 pm

Good to become visiting your weblog again, it has been months for me. Nicely this article that i've been waited for so long. I will need this post to total my assignment in the college, and it has exact same topic together with your write-up. Thanks, good share. Wholesale HGH

seoseoseo11212
Posts: 7
Joined: Sat Jun 11, 2022 3:58 pm

Re: A10 y axis motor destroyed twice

Post by seoseoseo11212 » Wed Aug 03, 2022 1:46 pm

I am really enjoying reading your well written articles. It looks like you spend a lot of effort and time on your blog. I have bookmarked it and I am looking forward to reading new articles. Keep up the good work. Buy HGH pens

seoseoseo11212
Posts: 7
Joined: Sat Jun 11, 2022 3:58 pm

Re: A10 y axis motor destroyed twice

Post by seoseoseo11212 » Sun Aug 07, 2022 11:16 pm

Very informative post ! There is a lot of information here that can help any business get started with a successful social networking campaign ! Pbns backlinks

seoseoseo11212
Posts: 7
Joined: Sat Jun 11, 2022 3:58 pm

Re: A10 y axis motor destroyed twice

Post by seoseoseo11212 » Thu Aug 11, 2022 9:22 pm

Great post i must say and thanks for the information. Education is definitely a sticky subject. However, is still among the leading topics of our time. I appreciate your post and look forward to more. Online money

seoseoseo11212
Posts: 7
Joined: Sat Jun 11, 2022 3:58 pm

Re: A10 y axis motor destroyed twice

Post by seoseoseo11212 » Wed Aug 17, 2022 1:07 am

This is my first time i visit here. I found so many entertaining stuff in your blog, especially its discussion. From the tons of comments on your articles, I guess I am not the only one having all the leisure here! Keep up the good work. I have been meaning to write something like this on my website and you have given me an idea. https://thesolarmovies.one/

Post Reply