Problem to recognize printer with Windows 10

Post Reply
FBR39120-STBAR
Posts: 1
Joined: Sun Aug 16, 2020 10:18 pm

Problem to recognize printer with Windows 10

Post by FBR39120-STBAR » Mon Aug 17, 2020 2:05 pm

Hello,
I inherited a GEEETECH i3 Pro B with GT2560 rev A + motherboard and FT232RQ USB chipset, my PC works with windows 10.
I plugged the printer into my PC's USB port and absolutely nothing happened.
The USB cable that connects the printer to the PC is hot
On the other hand, the fourth A4988 stepper driver, the one connected to E MOTOR of the GT2560 card is hot, not the others.
Is that why I can't recognize the printer in Windows 10?
Top
User avatar
LoBoHEAT
Posts: 75
Joined: Fri Nov 24, 2017 6:56 pm
Location: Spain
Contact:
Contact LoBoHEAT

Re: Problem to recognize printer with Windows 10

Post by LoBoHEAT » Tue Aug 18, 2020 11:55 pm

Please check if your board it's FT232RQ ir CH340

viewtopic.php?f=21&t=60612&p=81974#p81974

And install the driver you need before connect cable. If you connect after install and have the same problem probably board problem.

Best regards.
Please, support my collaboration, buy me a Kofi https://ko-fi.com/lachusmadeti THANKS!!
Top
Post Reply

Return to “Geeetech I3 Pro B”