A30 firmware.

[essex_chris]

And now after trying a few firmwares i am back to not being able to get into settings using the touchscreen

Don't tell me - now i need to open up the unit again and take the sd card out of the inside in order to change something on that.

What a mistake buying this printer was

[MorningsideSanitarium]

And now after trying a few firmwares i am back to not being able to get into settings using the touchscreen

Don't tell me - now i need to open up the unit again and take the sd card out of the inside in order to change something on that.

What a mistake buying this printer was

Yup. I stayed away from updating the firmware for a long time. Tried it today, and KNEW I shouldn't. Nothing but problems. I can't get to the settings menu either. I have no idea what's going on. I've even reflashed the firmware I had before updating. No change. This is such a stupid method of upgrading. Nothing but confusion and problems. Still trying to fix this.

[Sa1Wales]

Yeah it doesnt help when you have several stickied posts about firmware pointing at different versions, someone needs to sort out things. How hard is it to make sub folders in github? all you need to do is make sub folders for A10,A20,A30 and put the latest firmware in a folder called Latest Firmware. Instead you have to search for it. through a mixed list. Though I am getting annoyed with the A30 I love the print quality when it works, I was looking for the latest Firmware as none of my Slicers are now not responding to any Jog Controls in the slicer software or through the control panel.

[Marcellus]

Hello

Please tell us when a new firmware will be released (Geeetech A30) ?!?

Greets

[TheG]

Yeah, preferable Marlin 2.0 based with working features like M303, thanks

[Enrico Schwarz]

Hallo Geeetech,

Ich bitte sie um Hilfe.

Die Firmware für die Geeetech A30 ist falsch.
Ich habe 2 neue Geeetech A30 und bei beiden der gleiche Fehler.
Es wird nicht das komplette Druckbett genutzt.
Bauraum 320 x 320 x 420 mm
Bauteil 320 x 320 x 5 mm
Der G-Code für das Bauteil wurde mit EasyPrint erstellt.

Ergebnis

Siehe Fotos.


Hello Geeetech,

I ask you for help.

The firmware for the Geeetech A30 is wrong.
I have 2 new Geeetech A30 and both have the same error.
It is not the entire print bed used.
Installation space 320 x 320 x 420 mm
Component 320 x 320 x 5 mm
The G-code for the part was created with EasyPrint.

Result

See photos.







Firmware

[William]

Hi， 1.A30 firmware uses Smatto, you can download it here:https://www.geeetech.com/download.html?download_id=38
2. Its motherboard is GTM32 pro VB

[kathleswaford]

Thank you for posting this useful information to us, and keep posting such good articles. Beth Dutton Blue Coat

[kathleswaford]

So a lot to occur over your amazing blog. Your blog procures me a fantastic transaction of enjoyable Top Gun Jacket Salubrious lot beside the scene.

[kathleswaford]

Thank you for posting this useful information to us, and keep posting such good articles. Money Heist Costume