Does anyone have the appropriate LCD configuration section for setting up Klipper firmware on the A20M? Maybe an updated schematic for the GT2560v3 and LCD panel would also work.
thanks!
-W
Klipper Firmware LCD config
Re: Klipper Firmware LCD config
Klipper firmware we have not used.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Klipper Firmware LCD config
Someone else on this forum mentions that he got it working, but unfortunately didn't post how.
#[display]
#lcd_type: hd44780
#rs_pin: ar20
#e_pin: ar36
#d4_pin: ar21
#d5_pin: ar21
#d6_pin: ar5
#d7_pin: ar6
#encoder_pins: ^ar16, ^ar17
#click_pin: ^!ar19
Basically I need pin definitions for the GT2570v3 + LCD panel on the A20M to configure here.
-W
#[display]
#lcd_type: hd44780
#rs_pin: ar20
#e_pin: ar36
#d4_pin: ar21
#d5_pin: ar21
#d6_pin: ar5
#d7_pin: ar6
#encoder_pins: ^ar16, ^ar17
#click_pin: ^!ar19
Basically I need pin definitions for the GT2570v3 + LCD panel on the A20M to configure here.
-W
Re: Klipper Firmware LCD config
This is resolved - for those searching on how to make Klipper work with the A20M LCD :
[display]
lcd_type: st7920
cs_pin: ar5
sclk_pin: ar21
sid_pin: ar36
encoder_pins: ^ar16,^ar17
click_pin: ^ar19
[output_pin beeper]
pin: ar18
The GT2560v3 schematic is useless, had to derive this from digging through the Marlin firmware.
-W
[display]
lcd_type: st7920
cs_pin: ar5
sclk_pin: ar21
sid_pin: ar36
encoder_pins: ^ar16,^ar17
click_pin: ^ar19
[output_pin beeper]
pin: ar18
The GT2560v3 schematic is useless, had to derive this from digging through the Marlin firmware.
-W