Hello. From time to time strange artifacts appear on the display, and I have to restart the printer because I can't do anything else.
Firmware is the last of my page.
Has anyone had such problems?
Geeetech A10 LCD artefacts.
Geeetech A10 LCD artefacts.
- Attachments
-
- IMG_20200611_221522.jpg (408.72 KiB) Viewed 4291 times
-
- IMG_20200611_225054.jpg (454.33 KiB) Viewed 4291 times
-
- IMG_20200611_225048.jpg (432.51 KiB) Viewed 4291 times
Re: Geeetech A10 LCD artefacts.
Hi，it may be that the screen has received interference. It is recommended not to place items with strong electromagnetic interference capabilities next to the printer.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Geeetech A10 LCD artefacts.
Hmmm... But is on my working desk connected to normal 230v... But i check IT anywqy. Thanks
Re: Geeetech A10 LCD artefacts.
It should return to normal after restart
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Geeetech A10 LCD artefacts.
since V3.1, the screen of my A10M gets interferences very easily. the V3.0 did not have this problem. V4.0 has it as well for me. (the common point seems the new cable for LCD screen)
the insulation of the screen+SD card cable seems weird, it is not connected to GRD making it probably inefficient.
Armel
the insulation of the screen+SD card cable seems weird, it is not connected to GRD making it probably inefficient.
Armel