Runout Sensor

Post Reply
dabe
Posts: 1
Joined: Sun Apr 19, 2020 6:30 am

Runout Sensor

Post by dabe » Sun Apr 19, 2020 6:46 am

I purchased the A30 one Week ago. Everything works fine. Yesterday I tested the Filament Runout-Sensor:

When the Filament is running out, the Sensor is pausing the Printer.
The Nozzle and the Bed are cooling down and it is possible, that the printed Object looses the adhesion.

There is no sense in cooling down the system.

Is it possible to chance the basic settings, that the Bed keeps its temperature when the Runout Sensor is activated ?

Is a newer Firmware-Version available in which this problem is solved ?

Thanks a lot ...
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Runout Sensor

Post by William » Mon Apr 20, 2020 3:46 pm

Hi，when the print job is suspended, the temperature drop is normal.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
xengeist
Posts: 2
Joined: Sat Apr 25, 2020 5:27 am

Re: Runout Sensor

Post by xengeist » Thu Jun 11, 2020 2:07 pm

Look for a standby temperature several printers and slicers have it. I will let you know if I find it when I am done building it. Also look for an octoprint extension.
Cura_Standbye_Temp.png
Cura_Standbye_Temp.png (20.75 KiB) Viewed 11402 times
Top
Post Reply

Return to “A30M”