Extruder thermistor E0 damaged Solution

[Din0]

Hi
it is necessary to transfer the cable from the damage to the E0 thermistor to the extruder input E1 image.

PinOutV GT3260.png (388.95 KiB) Viewed 5213 times

Edit file " pins_GT2560_V3.h" FW MArlin 2.x (Use 2.0.5.3 ) as follows:

Marlin\src\pins\mega\pins_GT2560_V3.h

// Temperature Sensors
//
#define TEMP_0_PIN 9 // Analog Input Original 11
#define TEMP_1_PIN 11 // Analog Input Original 9

that's all

Ales

IMG_20200612_203545_1.jpg (546.52 KiB) Viewed 5153 times

[William]

thank you for your sharing!