I can't find any documentation about how to flash a bootloader onto gt2560 v3 board. I have an arduino uno that I am going to use an arduino isp programmer https://showbox.bio/ https://tutuapp.uno/ https://vidmate.cool/ to flash a new bootloader onto my gt2560 v3 board, but I can't find documentation on how to connect the programmer to the card. Could you please help me flash new bootloader onto my gt2560 v3 board?
Thank you for your help,
Flashing GT2560 v3 Bootloader
-
EdgarIsmael
- Posts: 3
- Joined: Sat Jun 06, 2020 8:02 pm
Flashing GT2560 v3 Bootloader
Last edited by EdgarIsmael on Mon Jun 08, 2020 1:18 pm, edited 1 time in total.
Re: Flashing GT2560 v3 Bootloader
Hi,you can download the firmware on the official website: https://www.geeetech.com/download.html?download_id=30.
A10 can update the firmware directly without refreshing the bootloader.
A10 can update the firmware directly without refreshing the bootloader.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Flashing GT2560 v3 Bootloader
Flash a bootloader board programmer who always going to see what is new in the programming. We are going to check everything in essaydot.com review programming because it is really important to check and all for it is interesting when we start to increase our learning stress.