I had a short circuit

Post Reply
lerhum
Posts: 2
Joined: Wed May 27, 2020 7:08 pm

I had a short circuit

Post by lerhum » Thu Jun 04, 2020 7:13 pm

since then the screen has shown nothing. the board heats up and the card has the following LEDs
IMG_20200522_180624.jpg
IMG_20200522_180624.jpg (287.96 KiB) Viewed 4054 times
is the card dead? what should i do (i also replaced the fuses)

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: I had a short circuit

Post by William » Fri Jun 05, 2020 9:57 am

Hi,is the chip hot?
If the chip is hot, the motherboard is broken.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

AnthoCond
Posts: 1
Joined: Mon Aug 24, 2020 2:21 pm

Re: I had a short circuit

Post by AnthoCond » Mon Aug 24, 2020 2:23 pm

The 3d printer offered by the gee tech is the best printer now a day in market. This printer has capability to do non stop working by the best dissertation writing service with out heating and you can check performance in video.

Post Reply