Hi,
I just bought the A20M and wanted to connect it to a Repetier-Server installation (on a Raspberry Pi4). I can see the printer but the server is telling me that there is no reasonable answer on the port. What can I do?
Thanks for a quick answer!
A20M with Repetier-Server
Re: A20M with Repetier-Server
Hi，it may be that you have not installed the driver, you can refer to this:viewtopic.php?f=21&t=60612&p=81974#p81974
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: A20M with Repetier-Server
- Linux Driver CH341.png (3.44 KiB) Viewed 3911 times
thanks for Your reply.
It seams, that the driver is installed, I get the message from my Raspberry Pi4 =
- Linux Driver CH341.png (3.44 KiB) Viewed 3911 times
Re: A20M with Repetier-Server
Hi，did you choose the correct baud rate according to the manual?
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!