Cura printing in only a straight line.

Pete907 · Post by **Pete907** » Sun May 17, 2020 10:57 pm

Hello Im using the latest version of Cura and Marlin 1.1.8 with my a10, it printed the dog fine since I installed Cura I can use the Monitor function but it only prints in a straight line about 1 in. Off of the heating bed can anyone please let me know what is wrong?

Post by **William** » Mon May 18, 2020 1:52 pm

Hi,can you provide pictures or videos?

mr_fosi · Post by **mr_fosi** » Thu May 21, 2020 8:39 am

Did you check all your stepper and stop plugs?

My x-axis plug has worked loose a couple times when I've moved the Z-axis all the way to the top of gantry.

jatmoreno89 · Post by **jatmoreno89** » Sat May 23, 2020 6:38 am

I have the same problem. when the printer must make the build plate adhesion it makes a straight line

Post by **William** » Sat May 23, 2020 9:40 am

Sorry, the picture is not clear, can you provide a video? I will judge it better for you.

Post by **William** » Sat May 23, 2020 9:41 am

mr_fosi wrote: ↑
Thu May 21, 2020 8:39 am
Did you check all your stepper and stop plugs?

My x-axis plug has worked loose a couple times when I've moved the Z-axis all the way to the top of gantry.

Hi, the line is long enough, you can adjust its position.

Geeetech

Cura printing in only a straight line.

Cura printing in only a straight line.

Re: Cura printing in only a straight line.

Re: Cura printing in only a straight line.

Re: Cura printing in only a straight line.

Re: Cura printing in only a straight line.

Re: Cura printing in only a straight line.