LCD display problem
Re: LCD display problem
Hi，here.
The wiring looks fine.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: LCD display problem
Hi William
the motherboard bootloader is V1.0.bin , not V3.0.bin
the motherboard bootloader is V1.0.bin , not V3.0.bin
Re: LCD display problem
bootloader programm, is V1.0.bin and not V3.0.bin
- Attachments
-
- motherboot V1.0.bin
- bootloader.PNG (53.22 KiB) Viewed 8287 times
Re: LCD display problem
Sorry for my typo, please refer to the file above.
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: LCD display problem
Hi William
The lcd screen works very well.
Thanks
The lcd screen works very well.
Thanks
Re: LCD display problem
LCD screen is ok
- Attachments
-
- LCD screen is ok
- Capture.PNG (863.97 KiB) Viewed 8241 times
Re: LCD display problem
Very happy for you！-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: LCD display problem
Hi William
I bought 2 LCD screens for my A30 from Geeetech official on ebay.
The original lcd is like at the bottom of the picture, the lcds that I bought are like at the top of the picture.
I plugged the new lcd into the st link,it turned on but nothing on it (white screen).
what i must to do ? update firmware, lcd bootloader bin, hex ? i don't want to make a mistake.
If you can tell me what you did with the lcd you sent me, step by step.
is it compatible with GTM32 pro ?
Thank you
Alexy
I bought 2 LCD screens for my A30 from Geeetech official on ebay.
The original lcd is like at the bottom of the picture, the lcds that I bought are like at the top of the picture.
I plugged the new lcd into the st link,it turned on but nothing on it (white screen).
what i must to do ? update firmware, lcd bootloader bin, hex ? i don't want to make a mistake.
If you can tell me what you did with the lcd you sent me, step by step.
is it compatible with GTM32 pro ?
Thank you
Alexy
- Attachments
-
- LCD screens
- lcd.PNG (1.36 MiB) Viewed 7857 times
Re: LCD display problem
Hello, you need to buy the same screen.
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: LCD display problem
where i can find it ?