PrusaSlicer Profile / How do settings
PrusaSlicer Profile / How do settings
Does Anyone have a profile for PETG for me for the PrusaSlicer or can anyone tell me how to set up the PrusaSlicer for the Geeetech A20M ?
Re: PrusaSlicer Profile / How do settings
Hi, If you use cura,
You can download it here, https://www.geeetech.com/download.html?download_id=47
Then use Settings-printer-manger printer
profile-import
Import configuration
You can refer to petg's temperature setting: https://www.simplify3d.com/support/mate ... uide/petg/
You can download it here, https://www.geeetech.com/download.html?download_id=47
Then use Settings-printer-manger printer
profile-import
Import configuration
You can refer to petg's temperature setting: https://www.simplify3d.com/support/mate ... uide/petg/
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
NewKidney1971
- Posts: 1
- Joined: Sun Sep 08, 2019 12:22 pm
Re: PrusaSlicer Profile / How do settings
Hmm thanks, for Cura i know to set up, but in PrusaSlicer i dont. I wanna test PrusaSlicer, because in Prusa i got better results on my other Printers.
Re: PrusaSlicer Profile / How do settings
Ever manage to get it setup? I'm trying to setup Prusa for dual color prints on the A30M. Specifically different colors in different areas, since CuraEngine seems incapable of making a proper prime/wipe tower for layers containting 2 colors in different parts. Either the supports are all one color or it keeps trying to change colors every other layer for supports.