Geeetech I3 Pro C. The angle between the Y motor fix plate and acrylic plate (rear)

Post Reply
vvplock
Posts: 2
Joined: Wed Mar 25, 2020 6:29 pm

Geeetech I3 Pro C. The angle between the Y motor fix plate and acrylic plate (rear)

Post by vvplock » Wed Mar 25, 2020 8:12 pm

Hello, friends!
Assembling Geeetech I3 Pro C
Is it correct that the acrylic Y motor fix plate is installed as shown in the pictures? Or should the angle between the Y motor fix plate engine board and acrylic plate (rear) be 90°? To get 90°, the ends of the bar must be leveled with a file. Is it necessary to do this?
Attachments
IMG_20200325_090418.jpg
IMG_20200325_090418.jpg (244.59 KiB) Viewed 24694 times
IMG_20200325_090554.jpg
IMG_20200325_090554.jpg (261.25 KiB) Viewed 24694 times
IMG_20200325_090033.jpg
IMG_20200325_090033.jpg (252.33 KiB) Viewed 24694 times
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech I3 Pro C. The angle between the Y motor fix plate and acrylic plate (rear)

Post by William » Thu Mar 26, 2020 10:32 am

Hi, you can view the assembly manual:
金属版pro C building_instruction .rar
(19.87 MiB) Downloaded 828 times
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
vvplock
Posts: 2
Joined: Wed Mar 25, 2020 6:29 pm

Re: Geeetech I3 Pro C. The angle between the Y motor fix plate and acrylic plate (rear)

Post by vvplock » Thu Mar 26, 2020 4:14 pm

Thanks. But the archive does not open, the format is incorrect or damaged
Top
Post Reply

Return to “Assembly”