Settings from the geetech filament

Post Reply
JuMe
Posts: 10
Joined: Wed Jan 01, 2020 5:20 pm

Settings from the geetech filament

Post by JuMe » Fri Jan 31, 2020 1:43 am

Hello Team A20M.

I use all colors of the geetech filament for my A20M. But I don't have the settings for S3D, like temperatures, feed data, mm and mm/sec.
Can anyone hero? Thanks already!
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Settings from the geetech filament

Post by William » Fri Jan 31, 2020 4:15 pm

Hi,If you use PLA consumables, the hot bed is stable at about 60 and the hot end temperature is about 210. If it is black consumables, the hot end is stable and appropriately reduced by 5-10. The reference range of printing speed is 30-60mm / s.
I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
JuMe
Posts: 10
Joined: Wed Jan 01, 2020 5:20 pm

Re: Settings from the geetech filament

Post by JuMe » Mon Mar 02, 2020 5:05 pm

Thanks William. Diese Daten habe ich angewendet. Warum bei dunklem Material andere Settings?
I have applied these data. Why different settings for dark material?
Top
Post Reply

Return to “Geeetech A20M”