Cura profile for Geeetech A20

[William]

Hi guys!
Are you can't find Geeetech A20 on Cura?
Don't worry
Refer to these:
------------------------------ --------------------------------------------------
------------------------------------------------------------------------------------
Update:Thanks for @vert's suggestions.
1. We added the G29 for the start code
We added the "G1 Y230 F6000" for the end code（ 2019/1/7）
-----------------------------------------------------------------------------------------
2. We attached the PLA filament profile for Multi_mixer printer（2019/1/23）
-----------------------------------------------------------------------------------------
3. We set the default filament diameter to 1.75mm and it can work with Cura 4.0(2019/4/7)
-----------------------------------------------------------------------------------------
4.Thanks for @LisaE‘s suggestions.The profile updated.(2019.4.17)
-----------------------------------------------------------------------------------------
5. Deleted the "Heating gcode for nozzle/hotbed"in"start code".Added the meshes file.(2019.4.24)






1.Download Profile for Geeetech 3Dprinter

Cura4.0 resources.zip

(158.48 KiB) Downloaded 2569 times

Download the PLA filament profile for A10M

Geeetech-pla.xml.zip

(932 Bytes) Downloaded 1769 times

------------------------------ --------------------------------------------------
------------------------------------------------------------------------------------
2. Unzip the zip file then you will get "resources"folder

Cura-1.png (76.4 KiB) Viewed 21000 times

------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
3.Copy "resources" to the
Cura installation directory
Default:
C:\Program Files\Ultimaker Cura 4.0

Cura-2.png (127.3 KiB) Viewed 21000 times

Cura-3.png (127.9 KiB) Viewed 21000 times

Cura-4.png (70.33 KiB) Viewed 21000 times

------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
3.Import the PLA filament profile for Geeetech A10M

Cura-5.png (25.54 KiB) Viewed 21000 times

Cura-6.png (61.65 KiB) Viewed 21000 times

4.Done!Enjoy it!

[Time]

hi Guys

what I have to do when using cura for mac?

[JuMe]

Jetzt ist die Cura 4.5 da. Gibt es inzwischen neue Setting für den A20M? Ich meine, die bisherigen sind veraltet und es gibt sicher neue Erkenntnisse.
------------------
Now the Cura 4.5 is here. Are there new settings for the A20M in the meantime? I mean, the previous ones are outdated and there are certainly new findings.