Temperature fluctuations

[thebakker]

Hello,

I noticed that my temperature (hot end) is fluctuating very heavily.
When printing at 200c it fluctuates between 185 and 205 in seconds.

I tried PID tuning but it didn't help anything

You can see it in this video (it isn't sped up).
https://photos.app.goo.gl/4PtrfP3PN8k3WJNL7

I even had a print failed because the printer said it failed heating

[William]

Hi, You can
1. Check whether the hot-end wiring is loose, including the wiring on the motherboard;
2. Reflash the firmware;
3. There may be a problem with the chip on the motherboard.

I hope this can help you.

[thebakker]

Reflashing worked thanks