A20M firmware

Post Reply
pawien
Posts: 30
Joined: Thu Dec 27, 2018 2:25 am

A20M firmware

Post by pawien » Fri Jan 03, 2020 3:31 am

I want to flash my A20M on Marlin 2.xx with Arduino.

Who has conf.h and conf.adv for me. with 3dtouch.
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A20M firmware

Post by William » Fri Jan 03, 2020 9:39 am

:D Hi, Currently you can use the hex format firmware on the official website,

https://www.geeetech.com/download.html?download_id=33

Then upload it using the firmware kit.

Or look for the vert setting.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
pawien
Posts: 30
Joined: Thu Dec 27, 2018 2:25 am

Re: A20M firmware

Post by pawien » Fri Jan 03, 2020 5:39 pm

Thank you
Top
pawien
Posts: 30
Joined: Thu Dec 27, 2018 2:25 am

Re: A20M firmware

Post by pawien » Fri Jan 03, 2020 5:44 pm

HI
I do not find it
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A20M firmware

Post by William » Fri Jan 03, 2020 5:59 pm

Hi,You can download the corresponding firmware you need to download here:
L}SB83AN9AHV}7452RIBGEL.png
L}SB83AN9AHV}7452RIBGEL.png (34.77 KiB) Viewed 9066 times
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
pawien
Posts: 30
Joined: Thu Dec 27, 2018 2:25 am

Re: A20M firmware

Post by pawien » Fri Jan 03, 2020 6:47 pm

HI
Thank you
But I wanted the config.h with 3d touch because I can set it to German.
I would like to use Arduino 1.1.9 or 2.0
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A20M firmware

Post by William » Sat Jan 04, 2020 9:09 am

Hi,If so, you can look up the settings for vert.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech A20M”