I see there is a v3.1 of the GT2560 for A10, but the product page looks exactly the same as the v3.0 (except the price
) So what exactly is the difference? Can I use it to replace my v3.0?GT2560 v3.1 for A10?
-
skirbysmall
- Posts: 7
- Joined: Mon Jul 15, 2019 12:02 am
GT2560 v3.1 for A10?
Hello.
I see there is a v3.1 of the GT2560 for A10, but the product page looks exactly the same as the v3.0 (except the price ) So what exactly is the difference? Can I use it to replace my v3.0?
I see there is a v3.1 of the GT2560 for A10, but the product page looks exactly the same as the v3.0 (except the price
) So what exactly is the difference? Can I use it to replace my v3.0?
Re: GT2560 v3.1 for A10?
Hi, correspondence is different, you need the motherboard corresponding to your machine model.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
skirbysmall
- Posts: 7
- Joined: Mon Jul 15, 2019 12:02 am
Re: GT2560 v3.1 for A10?
But both the v3.0 and 3.1 are listed as for the A10, are there different models of A10? If so, what changed between them that makes the boards incompatible?
Re: GT2560 v3.1 for A10?
Hi, different models of the machine make it impossible to connect some parts.
If you need to buy a motherboard, you need to compare it with your model and your motherboard type.
If you need to buy a motherboard, you need to compare it with your model and your motherboard type.
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: GT2560 v3.1 for A10?
Hola.
En primer lugar, me presento, pues este es mi primer post.
Hace menos de 15 días que tengo mi primera impresora 3d, Geeetech A10M. Y, por culpa mía, ya he tenido que leer muchos mensajes de este foro y muchísimas páginas web sobre arduino y GT2560.
Aprovecho para agradecer el esfuerzo desinteresado de los que han contribuido, sin saberlo, a resolver mi problema.
Por si sirve de algo, mi impresora tiene una GT2560 v3.1 y, estoy seguro de que no es exactamente igual que la de la A10.
Fíjate en la foto.
Traducción de Google Traductor:
Google Translate Translation:
Hi.
First, I introduce myself, as this is my first post.
Less than 15 days ago I have my first 3d printer, Geeetech A10M. And, because of me, I have already had to read many messages from this forum and many web pages about arduino and GT2560. : geek:: geek:
I take this opportunity to thank the selfless efforts of those who have contributed, without knowing it, to solving my problem.
In case it works, my printer has a GT2560 v3.1 and, I am sure it is not exactly the same as that of the A10.
Look at the picture.
En primer lugar, me presento, pues este es mi primer post.
Hace menos de 15 días que tengo mi primera impresora 3d, Geeetech A10M. Y, por culpa mía, ya he tenido que leer muchos mensajes de este foro y muchísimas páginas web sobre arduino y GT2560.
Aprovecho para agradecer el esfuerzo desinteresado de los que han contribuido, sin saberlo, a resolver mi problema.
Por si sirve de algo, mi impresora tiene una GT2560 v3.1 y, estoy seguro de que no es exactamente igual que la de la A10.
Fíjate en la foto.
Traducción de Google Traductor:
Google Translate Translation:
Hi.
First, I introduce myself, as this is my first post.
Less than 15 days ago I have my first 3d printer, Geeetech A10M. And, because of me, I have already had to read many messages from this forum and many web pages about arduino and GT2560. : geek:: geek:
I take this opportunity to thank the selfless efforts of those who have contributed, without knowing it, to solving my problem.
In case it works, my printer has a GT2560 v3.1 and, I am sure it is not exactly the same as that of the A10.
Look at the picture.
- IMG_20191126_171321.jpg (320.39 KiB) Viewed 6387 times
Re: GT2560 v3.1 for A10?
I've got the same A10m printer and because of the frustrating issues I've had with the stock hotend I'm upgrading to a chimera double. Are there pinout layouts/specs for the GT2560 v3.1 board so I can figure how to connect the second hot block?