A10 Super Plate Min Temp ERR

Post Reply
Grezmel
Posts: 2
Joined: Sun Oct 27, 2019 5:12 am

A10 Super Plate Min Temp ERR

Post by Grezmel » Sun Oct 27, 2019 5:21 am

Hi all,

Been printing successfully for a while now and suddenly receiving ERR: MINTEMP, PRINTER HALTED please reset. I’m not using any bed clips.

I’ve had a look and can see any soldier issues.

Any ideas,?
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A10 Super Plate Min Temp ERR

Post by William » Mon Oct 28, 2019 9:17 am

Hi, you can check if your thermistor is fully connected.
If you are fully connected,
you can try to measure the thermistor with a multimeter.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Grezmel
Posts: 2
Joined: Sun Oct 27, 2019 5:12 am

Re: A10 Super Plate Min Temp ERR

Post by Grezmel » Tue Oct 29, 2019 5:32 am

Thanks all, there was a break in the green wire. There is quite a bit of movement with the wires as the bed moves back and forth.
Top
Post Reply

Return to “Geeetech A10 Series”