Newbie with a problem A10m

[thoffmann]

Just finished assembling my new A10m but when I turn the power on at the power supply nothing happens. screen stays blank? is it something I did?

74693208_518839995623912_7794166414356512768_n.jpg (174.82 KiB) Viewed 15170 times

72444854_444553196179414_7170594187258101760_n.jpg (127.49 KiB) Viewed 15170 times

[thoffmann]

ok so I did a stupid stupid thing forgot to set the asm to 120 ugh sorry yet thanks

[William]

Hi,If the screen is still not lit after you turn on the printer now,
Can try:
1. Check if the power supply can be powered normally.
2. Reconnect the screen cable;
3. Check if there are three lights on the motherboard.

V3 三灯亮起的位置.jpg (1.51 MiB) Viewed 15168 times

[thoffmann]

got it working by my Y axis makes a horrible noise and skips any idea how to fix this?

[William]

Hi,Can you describe the problem specifically?
Or provide a specific video,
So that we can solve the problem better.

[Jarda3d]

check and tight all screws...

If still, then you measure and check/set driver voltage, it is easy.