Printing multiple colours

Post by **_kaktus_** » Sun Sep 22, 2019 6:20 pm

Hello.

If you do not have a mixer head, you can hold the printout until the filament is replaced.

vdb5590 · Post by **vdb5590** » Sat Oct 12, 2019 8:31 pm

Okay, so the mixer head is something that can be mounted on the A30, right?

Post by **_kaktus_** » Sat Oct 12, 2019 8:41 pm

Hi.

Yes.

It's a different component.

Check out the A30M.
You will see what components you need in case you want to make a modification. The mixing head is not everything.

vdb5590 · Post by **vdb5590** » Thu Oct 17, 2019 12:29 am

Okay, thanks for the explanation, I'll read more on this topic!

Post by **_kaktus_** » Thu Oct 17, 2019 1:23 am

Hi.

Greetings and good luck with your experiments.

Geeetech