Chang I3 Dual into M201 Version

Post Reply
huyenvu111
Posts: 1
Joined: Tue Oct 08, 2019 11:14 am

Chang I3 Dual into M201 Version

Post by huyenvu111 » Tue Oct 08, 2019 11:17 am

Hey,
I'm onwner of the standard Prusa I3 dual. I would like to change my Printer into the M201 Version.
I'm looking for the Alu-Hotend-mount plate (cyclops dual hotend) and for the GTM32 Board with software.

Perhaps I can still use my GT2560 Board and only change the software ??
Target should be, to ba able mixing colors etc like the M201 software allows it!
I've not many experiences in flashing softwares, dont want to break something. The Prusa I3 is printing very well so far. Just want to make it better ;)

Regards

Huyen
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Chang I3 Dual into M201 Version

Post by William » Tue Oct 08, 2019 11:49 am

Hi, the M201 board is GTM32 Pro VB.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:
Contact _kaktus_

Re: Chang I3 Dual into M201 Version

Post by _kaktus_ » Mon Oct 14, 2019 2:41 pm

Hello huyenvu111
:mrgreen:

In my opinion, your goal can be achieved with an existing version of the controller.
Of course, some accessories will need to be replaced.
I suggest that you start your project by finding the firmware in the required version for your controller board. :D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Top
Post Reply

Return to “Geeetech I3 Pro B”