Cura for duplicator 5

Post Reply
moonraker
Posts: 2
Joined: Sun Oct 06, 2019 10:55 pm

Cura for duplicator 5

Post by moonraker » Sun Oct 06, 2019 10:58 pm

Hi guys, Ive tried out cura with flashforge creator pro profile to slice the gcode and its a lot better then slic3r, making the printer actually usable, but there is no way to print directly from cura, only by importing gcode to repetier, is there a chance you might know the workaround to print directly from cura ?
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Cura for duplicator 5

Post by William » Mon Oct 07, 2019 10:00 am

Hi, Cura also prints files in STL format to generate gcode for printing.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
moonraker
Posts: 2
Joined: Sun Oct 06, 2019 10:55 pm

Re: Cura for duplicator 5

Post by moonraker » Tue Oct 08, 2019 2:46 am

the slicing is fine is just exporting it to repetier is a bit of a pain, cannot just press print in cura
Top
Post Reply

Return to “Software”