Profil A10M for PrusaSlicer

Post Reply
king76
Posts: 2
Joined: Tue May 14, 2019 3:06 am

Profil A10M for PrusaSlicer

Post by king76 » Sat Aug 31, 2019 10:30 pm

Hi,

I search profil for PrusaSlicer, i have A10M printer.

Thanks
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Profil A10M for PrusaSlicer

Post by William » Mon Sep 02, 2019 9:28 am

Hi, Can you provide your email address and I will send it to you.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
king76
Posts: 2
Joined: Tue May 14, 2019 3:06 am

Re: Profil A10M for PrusaSlicer

Post by king76 » Mon Sep 02, 2019 8:37 pm

Thanks !! PV
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Profil A10M for PrusaSlicer

Post by William » Tue Sep 03, 2019 9:06 am

:D
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Jarda3d
Posts: 189
Joined: Sat Jan 26, 2019 8:42 am

Re: Profil A10M for PrusaSlicer

Post by Jarda3d » Thu Sep 05, 2019 6:19 am

Download Slic3r.org beta version from 2019-07-05.

And use my profile. You will not want to go back to Prusa crap.
A10M Slic3r profile: here and fresh on github (lot of tips here)
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.
Top
wariel12
Posts: 1
Joined: Sun May 10, 2020 6:29 pm

Re: Profil A10M for PrusaSlicer

Post by wariel12 » Sun May 10, 2020 6:43 pm

Hello Everyone

I have installed the Geeetech A10M profile on Prusaslicer version 2.2.0
when I slice I get an error and the Gcode is not generated .
do I have to modify something ?
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Profil A10M for PrusaSlicer

Post by William » Mon May 11, 2020 10:52 am

Hi,It is recommended that you try using Repetier-Host.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Engr309
Posts: 4
Joined: Sun Jun 07, 2020 10:44 am

Re: Profil A10M for PrusaSlicer

Post by Engr309 » Mon Jun 29, 2020 8:46 am

The latest version of Repetier only gives the printer option for "A10", is this going to be different then the "Geeetech A10M" that is shown in the user manual? If so, how do I import the A10M printer configuration into Repetier?
Thanks!
Attachments
crap.png
crap.png (19.47 KiB) Viewed 11729 times
Top
Cenda737
Posts: 1
Joined: Wed Sep 23, 2020 2:46 pm

Re: Profil A10M for PrusaSlicer

Post by Cenda737 » Mon Sep 28, 2020 1:30 am

Hi,
I’m looking for PrusaSlicer profil for A10M printer.
Thks a lot in advance
Petr
Top
FearNaBoinne
Posts: 8
Joined: Fri Sep 27, 2019 4:54 pm

Re: Profil A10M for PrusaSlicer

Post by FearNaBoinne » Tue Sep 29, 2020 5:40 am

Cenda737 wrote: ↑
Mon Sep 28, 2020 1:30 am
 Hi,
I’m looking for PrusaSlicer profil for A10M printer.
Thks a lot in advance
Petr
Same!
Top
Post Reply

Return to “Geeetech A10 Series”