A30 problem

Post Reply
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A30 problem

Post by William » Mon Aug 26, 2019 10:12 am

Hi, You can 1. Check if your Teflon tube is fully connected;
             2. Heat the nozzle to 200° and manually feed the consumables to see if it can be discharged normally.
Determine if the nozzle is blocked;
             3. Check if the Teflon tube has any waste.
I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech A30 Series”