Colors are clear
-
joey4kelly
- Posts: 4
- Joined: Mon Jul 22, 2019 11:35 am
Colors are clear
I just got an A20M and am trying to dial it in and set it up an Cura. I seem to have it printing OK but for some reason, the 2nd color isn't that distinctive from the other color. I am printing a block with some letters on it and the letters are solid in color. The other color bleeds over in it. Wanted to see if anyone had any Idea why this may be happening. I have increase the size of the wipe and print tower. But that doesn't seem to make much of a difference.
- Attachments
-
- image.jpg (616.96 KiB) Viewed 8875 times
-
- 3dpic.jpg (142.23 KiB) Viewed 9040 times
Last edited by joey4kelly on Fri Jul 26, 2019 11:20 am, edited 2 times in total.
Re: Colors are clear
Hi, I don't quite understand what the second color you mean is different from other colors. Can you describe the details in detail?
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
joey4kelly
- Posts: 4
- Joined: Mon Jul 22, 2019 11:35 am
Re: Colors are clear
If you look at the letters they are suppose to be reds the first couple of letters are more black than red. I see pictures of other 2color printer where the colors are more defined and separate. I would like the red to be more red. I have tried other colors and it does the sa,e thing.
Re: Colors are clear
Hi.
Did you notice what was the ratio of color distribution for the mixer when printing
Did you notice what was the ratio of color distribution for the mixer when printing
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
-
joey4kelly
- Posts: 4
- Joined: Mon Jul 22, 2019 11:35 am
Re: Colors are clear
I am using cura. Where would I find that. Do I need to be using a different software.
Re: Colors are clear
Hi.
This information is shown on the printer display. This information can be observed during the printing process.
By paying attention to the content of the display you can be sure that everything goes according to your plan.
This information is shown on the printer display. This information can be observed during the printing process.
By paying attention to the content of the display you can be sure that everything goes according to your plan.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
-
joey4kelly
- Posts: 4
- Joined: Mon Jul 22, 2019 11:35 am
Re: Colors are clear
The mixer is 100,0. Now it only prints one cleaning tower I am assuming that is normal for dual color printer. It sure what else I can check
- Attachments
-
- image.jpg (507.82 KiB) Viewed 8876 times
Re: Colors are clear
I have the same problem with black and yellow color, and as you, the mixer is 100,0.
It seems like like there is no sufficient clean-up between changing the filament, i.e. when the printer switches to yellow, there is still some residue of the black filament in the pipeline, and then the yellow is coming as half-black and half-yellow
It seems like like there is no sufficient clean-up between changing the filament, i.e. when the printer switches to yellow, there is still some residue of the black filament in the pipeline, and then the yellow is coming as half-black and half-yellow
Re: Colors are clear
I had the same problem.
Now i use a square prime tower of 25mm.
and a minimum purge of 60mm³
Have you printed the lizard that was on the SD card that came with your printer?
Now i use a square prime tower of 25mm.
and a minimum purge of 60mm³
Have you printed the lizard that was on the SD card that came with your printer?