A 30 Power supply

rj16066 · Post by **rj16066** » Mon Jul 22, 2019 5:18 am

Is the GEEETECH A30 a 12vdc or 24vdc power supply?

Post by **William** » Mon Jul 22, 2019 10:41 am

Hi, You can provide your hardware version number, depending on the version, there are 12V and 24V respectively.

rj16066 · Post by **rj16066** » Mon Jul 22, 2019 11:16 pm

The only number I see is a MPN 800-001-0503

Post by **William** » Tue Jul 23, 2019 9:02 am

Hi, If you have a multimeter, you can measure the output voltage of the power supply.

Tomyuan · Post by **Tomyuan** » Tue Jul 23, 2019 9:41 am

Click LCD>Main menu>About
HW is under 2.0 then it is 12V, 2.1 or more is 24V.
cheers

rj16066 · Post by **rj16066** » Thu Jul 25, 2019 2:16 am

Thank you....

rj16066 · Post by **rj16066** » Mon Aug 05, 2019 4:55 am

Hardware version. V.3.5 So I assume it is the 24V power supply.

Thanks
RJ

BobaLives · Post by **BobaLives** » Tue Aug 06, 2019 5:12 am

If you open the control box and drop out the power supply it will tell you if it is 12V or 24V.

I bought my A30 last year and requested the 24V system, but I received the 12V and after first couple prints the fuse on the back kept popping when the bed would heat up. So I opened it up and was not happy to see I received the 12V (S-500-12) when I requested the 24V. After a back and forth with Geeetech, they sent me everything for the 24V system to upgrade. I made sure to open the control box and check the power supply to see if it said 24V (S-500-24).

This is the 12V power supply. I am printing with the 24V now, so I cannot open and take picture.

: 12V power supply; IMG_1598.jpg (84.05 KiB) Viewed 8723 times

Geeetech

A 30 Power supply

A 30 Power supply

Re: A 30 Power supply

Re: A 30 Power supply

Re: A 30 Power supply

Re: A 30 Power supply

Re: A 30 Power supply

Re: A 30 Power supply

Re: A 30 Power supply