Geeetech

Geeetech;
I am fianily able to complete mt 2nd print, after 4 month of replacing parts.
This A10T was sold as new, the shipping box showed no evidence of being opened.
The manufactures warrenty did apply.
I have replaced the hotend, the heatblock came ruptured.
I have replaced the extention board, ite extention board came with fan wires wraped around the pins and glued in place.
I have replaced several trolly wheels that has chunks of rubber missing.
I have replaced 1 belt (Y axis) due to missing teeth.
I have replaced Extruder motor E2, it will not operate.
I have replaced Y axis stepper motor, it would skip 1 tooth at 40mm from the limit switch.
I purchessed tools to repair this unit, It did not come with any.
I purchessed a build plate, It did not come with one.
The seller replaced the hotend. All other problems wrer refered to the manufacture under warrenty.
Geeetech the manufacture refuses to honor any warrenty.
Please send me the part listed, as replacements for the next failure.
The mainboard is identified as a 4.1 not a 4.1b.
This hacked in product will never get a good review from me.
I will retract all bad comments if you make this right.