Problem A10 pro calibration with new superplate.
Posted: Fri Jan 15, 2021 11:24 pm
Hello, I removed the original black plastic to replace it with a 4 mmm glass plate from Geeetech.
I can lower the plate with the 4 knobs, the nozzle still touches the glass.
I made the Z axis go up via the menu, perfect, I save, but when I adjust the 4 sides, the nozzle goes down and it hits.
Someone would have any idea? A big thank-you. Philippe.
I can lower the plate with the 4 knobs, the nozzle still touches the glass.
I made the Z axis go up via the menu, perfect, I save, but when I adjust the 4 sides, the nozzle goes down and it hits.
Someone would have any idea? A big thank-you. Philippe.