Page 1 of 1
A10M with clean Marlin 2.0 [ BLtouch ]
Posted: Thu Dec 31, 2020 7:20 am
by Dombo71
Hi...
Just get my printer..and did a clean Marlin install.
Looking great, and working fine.
Sound of the fans i loud, and are there simple solotions? [ firmware settings? ]
Only the strange part, the marlin see the board as v3 and i do have a 4.0
So i did try the update the firmware form geeetech, only stil got errors.
Where do i go wrong?
Other thing when i mount the BLtouch, the extruder is 5cm above the bed? [ someone have great how to? ]
Is this correct en do i need to setup the BLtouch, or is this a other problem?
Some one that have a clean Marlin install?
Or do i need to run the geeetech firmware?
Re: A10M with clean Marlin 2.0 [ BLtouch ]
Posted: Sat Jan 02, 2021 2:47 am
by dkerr
I used this video to tune in my BLTouch
https://www.youtube.com/watch?v=y_1Kg45APko
Seems to have worked ok. I used Octoprint to send Gcodes to the printer, if you don't have an option to do that then you'll have to figure out Pronterface or some of the other options (which are all terrible IMO)
I don't think the fans can be fixed in the firmware, i did see some posts on shrouds and mods that may help. (sorry, i didn't keep the links)
Fans are pretty cheap, there are quieter ones you could probably replace the stock ones with.
With a 4.0 board you should be able to use vert's marlin
https://github.com/Vertabreak/Verts-Marlin. Grab the release tag.
Re: A10M with clean Marlin 2.0 [ BLtouch ]
Posted: Mon Feb 01, 2021 4:50 pm
by IsadoraSigmund
The sound of the machine is annoying and very hard to hear.
Re: A10M with clean Marlin 2.0 [ BLtouch ]
Posted: Mon Dec 20, 2021 10:40 am
by EricaWright
I find it too bad to sound when listening to some
samsung klingelton. I found it lifeless with some minor interference.
Re: A10M with clean Marlin 2.0 [ BLtouch ]
Posted: Thu Jan 13, 2022 11:22 am
by Rick Washington
Sound effects don't sound right,
telecharger with some short sound and I found it to work fine.
Re: A10M with clean Marlin 2.0 [ BLtouch ]
Posted: Mon Jan 17, 2022 3:03 pm
by sonneriesvip
Re: A10M with clean Marlin 2.0 [ BLtouch ]
Posted: Fri Feb 11, 2022 12:31 pm
by GarrettFitzgerald
A very difficult question to answer , I also searched for that answer . Thanks
Vert for helping me I succeeded in fixing the error.
____________________________________________________________
Click font gerenator free.
Re: A10M with clean Marlin 2.0 [ BLtouch ]
Posted: Thu Mar 03, 2022 10:43 am
by lawn123
You have a lot of good articles to share. It will be extremely beneficial to myself, my family, and my friends. Thank you for sharing it with us.
free games online
Re: A10M with clean Marlin 2.0 [ BLtouch ]
Posted: Mon Mar 21, 2022 4:25 pm
by sonneriesvip
Collection de la meilleure liste de sonneries françaises.
https://sonneriesvip.com/sonnerie-totally-spies-mp3/
Re: A10M with clean Marlin 2.0 [ BLtouch ]
Posted: Fri Aug 19, 2022 3:37 pm
by cindery
Since you put so much time and effort into your writing, I want more individuals would do the same. Your vision and discernment have made a deep effect on me.
smash karts