Power Outage?
Posted: Wed Oct 21, 2020 3:21 am
I was working on a print using ABS and my fan wouldn't turn off even with the speed set to 0 on the machine and my slicer. So i unplugged the fan from the extruder base. However, when it was printing it sparked and shut off. Now the power cord is supplying power (can see the red light on the power switch), but nothing will turn on at all. I have a feeling it is a blown fuse or short circuited. Is there anyway to tell which is the problem and/or how to fix them? Using the A10M.