Page 1 of 1
Z axis grinding a10t
Posted: Thu Jun 18, 2020 6:54 pm
by angelei
So I just got my a10t geeetech printer in and it worked great but I wanted to add auto level. So I followed the instruction video on the geeetech site and used the smatto firmware updater as it showed. It worked until I pressed the auto home button on the printer as shown in the video and the z axis began making a grinding noise and would barely move. So I figured it might be an issue with the update so I tried flashing it back to the original firmware provided by geeetech for the a10t. It still made the noise but would not move and then the LCD screen started flashing with weird characters and the smatto program crashed. Not sure what to do but I'm afraid to do anything else right now.
Re: Z axis grinding a10t
Posted: Fri Jun 19, 2020 9:57 am
by William
Hi, can you provide video? Here you can upload compressed files
Re: Z axis grinding a10t
Posted: Wed Sep 30, 2020 3:06 am
by Roanne625
Z axis grinding with new features are now available online. This factor makes it more convenient for online users. I want to buy HP printer can you please share some info about this. The
best thesis writing service helps students while doing article work.
Re: Z axis grinding a10t
Posted: Thu Nov 19, 2020 5:36 am
by Liana
If you are looking for app developers in Dubai To promote your business or to reach your clients easily or for any other purpose then
mistersaad is the best approach for you
Re: Z axis grinding a10t
Posted: Thu Dec 10, 2020 6:34 pm
by steve91
Even in the darkest hours of your life, I will stand by your side holding onto the only candle and light up all the non-illuminated areas. May God shower you with all the happiness in the world!
Good Bye 2020 Welcome 2021 Quotes!
Re: Z axis grinding a10t
Posted: Fri Feb 19, 2021 1:14 pm
by muttyhere
After study a few of the blog posts on your website now, and I truly like your way of blogging. I bookmarked it to my bookmark website list and will be checking back soon. Please check out my website as well and let me know what you think.
structural engineering assignment help
Re: Z axis grinding a10t
Posted: Sat Feb 27, 2021 5:25 pm
by Damion852
angelei wrote: ↑Thu Jun 18, 2020 6:54 pm
So I just got my a10t geeetech printer in and it worked great but I wanted to add auto level. So I followed the instruction video on the geeetech site and used the smatto firmware updater as it showed. It worked until I pressed the auto home button on the printer as shown in the video and the z axis began making a grinding noise and would barely move. So I figured it might be an issue with the update so I tried flashing it back to the original firmware provided by geeetech for the a10t. It still made the noise but would not move and then the LCD screen started flashing with weird characters and the smatto program crashed. Not sure what to do but I'm afraid to do anything else right now.
One of the motor cables is just barely long enough. Sure enough, the connection was loose. I tightened it and that fixed it immediately. I loosened it just to see, and I got that nosie again. Thank you so much. Sometimes it's the small things that get overlooked.
Re: Z axis grinding a10t
Posted: Thu Mar 10, 2022 6:03 pm
by hipohaha
The information you shared is quite complete. I will research more on this topic
paper minecraft