Add OFFSET ability in official Firmware (.hex) for V4 board?

Post Reply
CarsonGrey
Posts: 5
Joined: Tue May 26, 2020 6:19 pm

Add OFFSET ability in official Firmware (.hex) for V4 board?

Post by CarsonGrey » Tue May 26, 2020 6:33 pm

Hi,

Just discovered that since GT2560 V4.0, no offset option are available :
- no menu item omegle discord xender : Prepare / Set Home Offsets
- no support of M428 GCode
- no support of M206 GCode

Any chance to convince development team that giving the ability to define in a permanent way offset (especially on Z) is really worth the value ?

Thanks
Last edited by CarsonGrey on Thu May 28, 2020 1:12 pm, edited 1 time in total.
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Add OFFSET ability in official Firmware (.hex) for V4 board?

Post by William » Wed May 27, 2020 11:31 am

Hi，if the auto leveling function is not used, the offset is not needed.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
robinjamess
Posts: 6
Joined: Sat Mar 27, 2021 2:26 am

Re: Add OFFSET ability in official Firmware (.hex) for V4 board?

Post by robinjamess » Sun May 23, 2021 5:33 am

CarsonGrey wrote: ↑
Tue May 26, 2020 6:33 pm
 Hi,

Just discovered that since GT2560 V4.0, no offset option are available :
- no menu item : Prepare / Set Home Offsets
- no support of M428 GCode
- no support of M206 GCode

Any chance to convince development team that giving the ability to define in a permanent way offset (especially on Z) is really worth the value ?
TcsWebmail DadeSchools Upsers

Thanks
facing very similar issue
Top
Post Reply

Return to “Geeetech A10 Series”