Page 1 of 1
Cura printing in only a straight line.
Posted: Sun May 17, 2020 10:57 pm
by Pete907
Hello Im using the latest version of Cura and Marlin 1.1.8 with my a10, it printed the dog fine since I installed Cura I can use the Monitor function but it only prints in a straight line about 1 in. Off of the heating bed can anyone please let me know what is wrong?
Re: Cura printing in only a straight line.
Posted: Mon May 18, 2020 1:52 pm
by William
Hi,can you provide pictures or videos?
Re: Cura printing in only a straight line.
Posted: Thu May 21, 2020 8:39 am
by mr_fosi
Did you check all your stepper and stop plugs?
My x-axis plug has worked loose a couple times when I've moved the Z-axis all the way to the top of gantry.
Re: Cura printing in only a straight line.
Posted: Sat May 23, 2020 6:38 am
by jatmoreno89
I have the same problem. when the printer must make the build plate adhesion it makes a straight line
Re: Cura printing in only a straight line.
Posted: Sat May 23, 2020 9:40 am
by William
Sorry, the picture is not clear, can you provide a video? I will judge it better for you.
Re: Cura printing in only a straight line.
Posted: Sat May 23, 2020 9:41 am
by William
mr_fosi wrote: ↑Thu May 21, 2020 8:39 am
Did you check all your stepper and stop plugs?
My x-axis plug has worked loose a couple times when I've moved the Z-axis all the way to the top of gantry.
Hi, the line is long enough, you can adjust its position.