I need a cover for the motherboard fan v4.0
The motherboard fan is very loud and always 100% working. Is there any way to decrease the rpm?
Thanks!
Geeetech v4.0 noisy
Re: Geeetech v4.0 noisy
Hello
Mother board fan is connected to the FAN2.B output on the new mother board GT2560 V4
Try this gcode : M106 S127 P2 to decrease rpm to 50%
S127 for 50% of max fan speed (255)
P2 for the FAN2 output
https://reprap.org/wiki/G-code#M106:_Fan_On
I had the same problem. Finally I upsided down the mother board fan and put a cover to exit air flow by the right side and reduce the noise:
https://www.thingiverse.com/thing:4016406
Mother board fan is connected to the FAN2.B output on the new mother board GT2560 V4
Try this gcode : M106 S127 P2 to decrease rpm to 50%
S127 for 50% of max fan speed (255)
P2 for the FAN2 output
https://reprap.org/wiki/G-code#M106:_Fan_On
I had the same problem. Finally I upsided down the mother board fan and put a cover to exit air flow by the right side and reduce the noise:
https://www.thingiverse.com/thing:4016406