Hello, I have a Geeetech A10 with a GT2560 V3.1 with TMC2208 for the X Y Z axes, and when I changed the motor (because they were only going in one direction)when rebuilt, my printer doesn't turned on anymore.
Well yes, but 1 second and after the power supply is out, and the printer turns off directly, so I changed the power supply by one sent by the GEEETech support but nothing can be done, I have the same problem, the power supply works 1 second and is out. The fan of the power supply doesn't turn anymore and doesn't send anything (I measured with a multimeter).
Do you have any idea where this could be coming from?
Printer not powering
Re: Printer not powering
hi，whether there is a red light on the power supply, if it is off, the power supply may be damaged.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!